CAD | |
RoHS | Supporting RoHS 10 substance |
Stage surface size | 60×70mm |
Travel distance[mm] | 30mm |
Load capacity(Horizontal use)[kgf] | 10 |
Load capacity(Vertical use)[kgf] | 3 |
Load capacity(Horizontal use)[N] | 98 |
Load capacity(Vertical use)[N] | 29.4 |
Ball screw φ diameter -Lead [mm] |
φ8 Lead 1 |
Connector specifications | Pig tail |
Guide | Linear Ball Guide |
Main material | Special Steel-Electroless nickel plating |
【Controller】 DS102/DS112 |
Non-supporting |
Motor option | Motorless |
Motorless: Applicable size | □38 Servo motor specification |
Accessory cable | Sensor cable 2m One end loose wire |
Grease change | LG2(Clean grease) |
MAX Speed[mm/sec] ※ Standard motor spec |
20 |
Resolution Standard motor spec |
2μm/Pulse(Full-step) |
Uni-directional positioning accuracy [Withinμm] |
5 |
Repeatability positioning accuracy [Within±μm] |
0.5 |
Lost motion [Within μm] | 1 |
Straightness[Withinμm] | 3 |
Pitching[Within″] | 20 |
Yawing[Within″] | 15 |
Motion parallelism[Within μm] | 10 |
Moment stiffness: Pitch [″/N・cm] |
0.06 |
Moment stiffness: Yaw [″/N・cm] |
0.05 |
Moment stiffness: Roll [″/N・cm] |
0.05 |
Parallelism of travel[within μm] | 15 |
Backlash[Within μm] | 1 |
Limit sensor | Available |
Origin sensor | Available |
Slit origin sensor | - |
Weight[kg] | 0.74 |
Motor Bracket | ○(Body installed) |
Coupling (with screws) | ○ |
Mounting screw | For motor(M3×12[4pcs]), For product(M4×10[4pcs]) |
Sensor cable (One end loose wire) | ○(HR10AP-S-SB-6-2) |