SURUGA SEIKI CO., LTD.

Dimensions

Model configuration/Option code

Electrical specifications/cable connection diagram

Grease change

【Accuracy Guarantee】
＜Grease for Clean room＞
・Since viscous resistance of grease increases, it becomes difficult for this grease to fulfill the same specification of standard grease type described on catalog.
・Furthermore, it tends to have bad tracking of micro-step feeding.
・The guaranteed accuracy value is 1.5 times the stopping performance of the standard grease type.
・Since the CAVE-X series, KXT series, and KXS series are standard for clean environments (AFF), we guarantee the accuracy of the specifications listed on each product page.

【Accuracy Guarantee】
＜Grease for Vacuum＞
・Shipping accuracy may vary due to grease viscous resistance, etc.
・Specs posted on each product introduction page are not guaranteed.

【Grease change spot】
・Guides and bearings (excluding bearings with seals and support units)
・Ball screw

※Ball screw, guide and bearing (bearing without seals only) are processed with coating after cleansing in plant.
※Grease change of stepping motor is not available.

Stage surface size	40×40mm
Travel distance[mm]	15
Load capacity[kgf]	3
Guide	Cross Roller Guide
Main material	Aluminum -Black alumite finishing
MAX Speed [mm/sec]	10
Single axis accuracy specification Repeatability positioning accuracy [Within ±μm]	0.2
Single axis accuracy specification Straightness[Withinμm]	3

Model	Stage surface size	Travel distance[mm]	Load capacity[kgf]	Ball screw φ diameter -Lead [mm]	Guide	Main material	Sensor cover position	【Controller】 DS102/DS112	Motor option	Accessory cable	Grease change	MAX Speed [mm/sec]	Resolution	Single axis accuracy specification Uni-directional positioning accuracy [Within μm]	Single axis accuracy specification Repeatability positioning accuracy [Within ±μm]	Single axis accuracy specification Lost motion [Within μm]	Single axis accuracy specification Straightness[Withinμm]	Single axis accuracy specification Pitching[Within ″]	Single axis accuracy specification Yawing[Within ″]	Weight[kg]	CAD	Qty	Estimate
KWC04015-C	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Without cable	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CA	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 2m Both end connectors	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CA-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 2m Both end connectors	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CA-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 2m Both end connectors	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CA-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 2m Both end connectors	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CB	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 2m One end loose wire	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CB-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 2m One end loose wire	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CB-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 2m One end loose wire	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CB-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 2m One end loose wire	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CC	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 4m Both end connectors	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CC-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 4m Both end connectors	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CC-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 4m Both end connectors	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CC-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Standard 4m Both end connectors	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CD	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 4m One end loose wire	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CD-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 4m One end loose wire	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CD-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 4m One end loose wire	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CD-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Standard cable 4m One end loose wire	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CE	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Connector only (no cable)	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CE-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Connector only (no cable)	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CE-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Connector only (no cable)	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CE-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Connector only (no cable)	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CF	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 2m Both end connectors	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CF-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 2m Both end connectors	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CF-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 2m Both end connectors	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CF-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 2m Both end connectors	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CG	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 2m One end loose wire	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CG-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 2m One end loose wire	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CG-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 2m One end loose wire	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CG-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 2m One end loose wire	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CH	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 4m Both end connectors	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CH-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 4m Both end connectors	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CH-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 4m Both end connectors	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CH-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting	5 Phase Step(Standard)	Robot cable 4m Both end connectors	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CJ	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 4m One end loose wire	Standard grease	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-C-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Without cable	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CJ-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 4m One end loose wire	AFF(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CJ-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 4m One end loose wire	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-CJ-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Robot cable 4m One end loose wire	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-C-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Without cable	LG2(Clean grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-C-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Supporting (requires cable with attached connectors on both ends)	5 Phase Step(Standard)	Without cable	Fomblin YVAC2 (vacuum grease)	10	2μm/Pulse(Full-step)	10	0.2	1	3	25	20	1.03
KWC04015-PAP	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Non-supporting	α step_□28mm	Cable for α step	Standard grease	10	1μm 1000P/R setting	10	0.2	1	3	25	20	1.45
KWC04015-PAP-J	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Non-supporting	α step_□28mm	Cable for α step	AFF(Clean grease)	10	1μm 1000P/R setting	10	0.2	1	3	25	20	1.45
KWC04015-PAP-K	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Non-supporting	α step_□28mm	Cable for α step	LG2(Clean grease)	10	1μm 1000P/R setting	10	0.2	1	3	25	20	1.45
KWC04015-PAP-L	40×40mm	15	3	φ6 Lead 1	Cross Roller Guide	Aluminum -Black alumite finishing	L position	Non-supporting	α step_□28mm	Cable for α step	Fomblin YVAC2 (vacuum grease)	10	1μm 1000P/R setting	10	0.2	1	3	25	20	1.45

SURUGA SEIKI Co,Ltd.