Motorless 2-axis Goniometer Stage
【New】
Motorless 2-axis Goniometer Stage
Worm gear:KAW06V
Spec
CAD |
|
RoHS |
RoHS Directive(2011/65/EU) |
Stage surface size |
60×60mm |
Travel length: Upper axis[±°] |
8 |
Travel length: Lower axis[±°] |
6 |
Load capacity[kgf] |
4.5 |
Load capacity[N] |
44.1 |
Travel mechanism |
Worm gear |
Reduction ratio: upper shaft |
1/225 |
Reduction ratio: lower shaft |
1/292 |
Guide |
Cross Roller Guide |
Main material |
Aluminum-Black alumite finishing |
Stage height[mm] |
50±0.4mm |
Height of center rotation |
75±0.4mm |
Sensor logic |
All N.C. |
Connector specifications |
Pig tail |
Sensor cover position |
Opposite attached |
Motor option |
Motorless |
Motorless: Applicable size |
□28 Stepping motor specification |
Accessory cable |
Sensor cable 2m One end loose wire |
Grease change |
Standard grease |
MAX Speed Upper Axis [°/sec]Standard motor spec |
16 |
MAX Speed Under Axis [°/sec]Standard motor spec |
12.5 |
Resolution_upper axis Standard motor spec |
0.032°/Pulse(Full-step) |
Resolution_lower axis Standard motor spec |
0.002466°/Pulse(Full-step) |
Repeatability positioning accuracy [Within±°] |
0.003 |
Lost motion[Within °] |
0.01 |
Runout accuracy of center rotation [mm Within] |
- |
Moment stiffness: Pitch [″/N・cm] |
0.41 |
Moment stiffness: Yaw [″/N・cm] |
0.2 |
Moment stiffness: Roll [″/N・cm] |
0.41 |
Limit sensor |
Available |
Origin sensor |
Available |
Slit origin sensor |
- |
Weight[kg] |
0.8 |
Motor Bracket |
○(Body installed) |
Coupling (with screws) |
○ |
Mounting screw |
For motor(M2.5×6[8pcs]), For product(M4×10[4pcs]) |
Sensor cable (One end loose wire) |
○(HR10AP-S-SB-6-2) |