PRODUCTS
Controller
Stepping motor
Controller
:DS102
Controller
:DS102
Spec
| CAD |
|
| RoHS | |
| Input power | AC100～240V±10% |
| External Dimensions[mm] | 140(W)×300(D)×90(H) |
| Maximum power consumption | Less than 70W |
| Driver type (number of divisions) | Normal (Full/Half) |
| Driver rated current | 0.75A/Phase |
| General purpose input/output | None |
| Weight | 2.2kg |
| Number of controlled axis | 2 |
| Program function | 8 programs (can be started/stopped by control I/O) |
| Teaching function | 64 points (positioning in control I/O) |
| Home position | 1 place for each axis |
| Link function | RS485 (up to 3 units and 6 axes can be externally controlled by daisy chain) |
| Drive speed setting range | 1～999,999pps |
| Acceleration/deceleration time setting range | 1～9,999ms |
| Rise speed setting range | 1～9,999ms |
| Coordinate setting range | ±99,999,999pls |
| Interpolation function | 6-axis linear interpolation(between link device is easy linear interpolation |
| Origin detection | 1 point on each axis (logic switchable) |
| Proximity origin detection | 1 point on each axis (logic switchable) |
| Machine limit | 2 points on each axis CW/CCW direction (logic switchable) |
| Origin detection method | 12 methods |
| Sensor power supply | DC5V |
| Interface(RS232C) | 4,800～38,400bps [D-SUB9 pin male] |
| Interface(USB2.0) | Supporting only Full/Low Speed [USB mini-B terminal] |
| Interface (control I/O) | 9 inputs (24V photocoupler), 12 outputs (open collector) |
| Accessory | Power cable x 1, CD-ROM (USB driver) x 1 |
| ※ | Please note that the components may be changed without prior notice to the extent that the specifications and performance are not affected for the stable supply of the product. |
| ※※ | ※Windows7/8: If you are unable to install new drivers, you will need to connect an old controller (DS102/DS112) and install the drivers.Please consult with us if you do not have an old controller at hand. |
© 2017 SURUGA SEIKI CO.,LTD.