Z-Axis Motorized Stage
【New】
Z-Axis Linear Ball Guide
:KZL06050
Dimensions
Model configuration/Option code
Grease change

【Accuracy Guarantee】
<Grease for Clean room>
・Since viscous resistance of grease increases, it becomes difficult for this grease to fulfill the same specification of standard grease type described on catalog.
・Furthermore, it tends to have bad tracking of micro-step feeding.
・The guaranteed accuracy value is 1.5 times the stopping performance of the standard grease type.
・Since the CAVE-X series, KXT series, and KXS series are standard for clean environments (AFF), we guarantee the accuracy of the specifications listed on each product page.

【Accuracy Guarantee】
<Grease for Vacuum>
・Shipping accuracy may vary due to grease viscous resistance, etc.
・Specs posted on each product introduction page are not guaranteed.

【Grease change spot】
・Guides and bearings (excluding bearings with seals and support units)
・Ball screw

※Ball screw, guide and bearing (bearing without seals only) are processed with coating after cleansing in plant.
※Grease change of stepping motor is not available.

Spec
Stage surface size60×60mm
Travel distance[mm]50
Load capacity[kgf]7
GuideLinear Ball Guide
Main material Stainless steel
-Electroless nickel plating
MAX Speed
[mm/sec]
15~50
Single axis accuracy specification
Repeatability positioning accuracy
[Within ±μm]
0.5
Single axis accuracy specification
Straightness[Withinμm]
3
Option
Ball screw[Lead mm]
Cover
Origin sensor option
【Controller】
DS102/DS112
Motor option
Cable option
Driver (Amplifier)・Cable option
Grease change
MAX Speed
[mm/sec]
Spec List
KZL06050M-C1-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available None Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.15 PART Community
KZL06050M-C1-C1 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-A-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-A-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-B 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-B-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-B-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-C-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-C-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-D 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-D-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-D-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-E 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-E-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-E-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-F 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-F-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-F-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-G 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-G-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-G-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-H 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-H-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-H-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-J 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-J-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-J-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Without cable LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C1-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW right side Supporting 5 Phase stepping motor
(Standard)
Without cable Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-A-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-A-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-B 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-B-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-B-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-C-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-C-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-D 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-D-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-D-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-E 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-E-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-E-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-F 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-F-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-F-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-G 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-G-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-G-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-H 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-H-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-H-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-J 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-J-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-J-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Without cable LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C2-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CCW left side Supporting 5 Phase stepping motor
(Standard)
Without cable Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-A-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-A-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-B 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-B-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-B-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-C-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-C-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-D 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-D-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-D-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-E 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-E-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-E-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-F 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-F-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-F-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-G 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-G-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-G-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-H 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-H-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-H-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-J 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-J-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-J-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Without cable LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C3-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center right side Supporting 5 Phase stepping motor
(Standard)
Without cable Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-A-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-A-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-B 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-B-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-B-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-C-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-C-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-D 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-D-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-D-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-E 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-E-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-E-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-F 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-F-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-F-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-G 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-G-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-G-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-H 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-H-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-H-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-J 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-J-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-J-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Without cable LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C4-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available Center left side Supporting 5 Phase stepping motor
(Standard)
Without cable Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-A-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-A-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-B 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-B-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-B-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_2m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-C 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-C-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-C-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-D 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-D-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-D-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
One end loose wire_4m Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-E 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-E-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-E-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Connector only (no cable) Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-F 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-F-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-F-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
2m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-G 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-G-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-G-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
2m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-H 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-H-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-H-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Robot cable
4m Both end connectors
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-J 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-J-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-J-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting
(requires cable with attached connectors on both ends)
5 Phase stepping motor
(Standard)
Robot cable
4m One end loose wire
Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-K 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Without cable LG2(Clean grease) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C5-L 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW right side Supporting 5 Phase stepping motor
(Standard)
Without cable Fomblin YVAC2
(vacuum grease)
20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C6 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW left side Supporting 5 Phase stepping motor
(Standard)
Without cable Standard grease (AFF standard) 20 2μm/Pulse(Full-step) 5 0.5 1 3 20 15 25 2.18 PART Community
KZL06050M-C1-C6-A 60×60mm 50 7 φ8 Lead 1 Linear Ball Guide Stainless steel
-Electroless nickel plating
Available CW left side Supporting 5 Phase stepping motor
(Standard)
Both end connectors_2m Standard grease (AFF standard) 20