SURUGA SEIKI CO., LTD.

製品のお問合せ

お見積・ご注文

HOME >
Motorized Stage >
Motorized Linear Stage >
Z-Axis Motorized Stage >
Z-Axis Cross Roller Guide:KZ1040

PRODUCTS

Prefix matching

Perfect matching

製品情報
新製品情報
お見積りとご注文について
お問合せについて

TEL:0120-789-446　FAX:0120-789-449

info@suruga-g.co.jp

お見積依頼フォーム

ご注文についてのご案内

TEL:0120-789-446　FAX:0120-789-449

X-Axis Motorized Stage

XY-Axis Motorized Stage

Z-Axis Motorized Stage

XYZ-Axis Motorized Stage

Horizonal Z-Axis Stage

Z-Axis Motorized Stage

Z-Axis Cross Roller Guide
:KZ1040

Dimensions

Model configuration/Option code

The model for the stage surface size 100×100mm specification is "KZ1040C~".

Electrical specifications/cable connection diagram

Grease change

【Accuracy Guarantee】
＜Grease for Clean room＞
・Since viscous resistance of grease increases, it becomes difficult for this grease to fulfill the same specification of standard grease type described on catalog.
・Furthermore, it tends to have bad tracking of micro-step feeding.
・The guaranteed accuracy value is 1.5 times the stopping performance of the standard grease type.
・Since the CAVE-X series, KXT series, and KXS series are standard for clean environments (AFF), we guarantee the accuracy of the specifications listed on each product page.

【Accuracy Guarantee】
＜Grease for Vacuum＞
・Shipping accuracy may vary due to grease viscous resistance, etc.
・Specs posted on each product introduction page are not guaranteed.

【Grease change spot】
・Guides and bearings (excluding bearings with seals and support units)
・Ball screw

※Ball screw, guide and bearing (bearing without seals only) are processed with coating after cleansing in plant.
※Grease change of stepping motor is not available.

Spec

Stage surface size	100×100mm
Travel distance[mm]	40
Load capacity[kgf]	7.5
Guide	Cross Roller Guide
Main material	Aluminum -Black alumite finishing
MAX Speed [mm/sec]	10
Single axis accuracy specification Repeatability positioning accuracy [Within ±μm]	0.2
Single axis accuracy specification Straightness[Withinμm]	Within 2μm (Z-Axis accuracy specification )

Option

Ball screw[Lead mm]

Sensor cover position

L position

Opposite attached

【Controller】
DS102/DS112

Supporting

Motor option

5 Phase stepping motor (High resolution)

Cable option

Cable is included

Connector only (no cable)

Without cable

Cable kinds

Robot cable

Standard cable

Cable length

Both end connectors_2m

Both end connectors_4m

One end loose wire_2m

One end loose wire_4m

Grease change

AFF(Clean grease)

Fomblin YVAC2 (vacuum grease)

LG2(Clean grease)

Standard grease

MAX Speed
[mm/sec]

～10

Relevant product

Stepping motor
Controller
:DS102

Stepping motor
Controller
:DS112

Handy terminal
: DT100

DS102/112 series
Control software
:DSCONTROL-WIN

For stepping motor
Driver:DC24V

For stepping motor
Driver:AC100V

Motorized Stage cable
:D214-2-NA

Motorized Stage cable
:D214-2-RA

Spec List

preview

Model

Stage surface size

Travel distance[mm]

Load capacity[kgf]

Ball screw φ diameter
-Lead [mm]

Guide

Main material

Sensor cover position

【Controller】
DS102/DS112

Motor option

Accessory cable

Grease change

MAX Speed
[mm/sec]

Resolution

Single axis accuracy specification
Uni-directional positioning accuracy
[Within μm]

Single axis accuracy specification
Repeatability positioning accuracy
[Within ±μm]

Single axis accuracy specification
Lost motion
[Within μm]

Single axis accuracy specification
Straightness[Withinμm]

Single axis accuracy specification
Pitching[Within ″]

Single axis accuracy specification
Yawing[Within ″]

Vertical degree (full stroke)
[within μm]

Weight[kg]

CAD

Qty

Estimate

KZ1040-LG

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG1

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG1-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG1-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG1-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG2

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG2-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG2-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG2-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG3

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG3-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG3-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG3-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG4

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG4-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG4-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG4-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG5

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG5-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG5-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG5-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG6

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG6-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG6-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG6-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG7

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG7-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG7-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG7-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG8

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG8-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG8-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG8-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG9

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG9-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG9-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG9-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-LG-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

L position

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG1

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG1-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG1-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG1-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
2m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG2

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG2-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG2-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG2-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
4m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG3

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG3-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG3-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG3-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Standard cable
4m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG4

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG4-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG4-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG4-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Connector only (no cable)

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG5

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG5-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG5-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG5-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Without cable

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG6

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG6-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG6-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG6-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
2m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG7

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG7-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG7-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG7-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Robot cable
4m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG8

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG8-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG8-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG8-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
4m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG9

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

Standard grease

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG9-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG9-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG9-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting
(requires cable with attached connectors on both ends)

5 Phase Step(High resolution)

Robot cable
2m One end loose wire

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG-J

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

AFF(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG-K

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

LG2(Clean grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

KZ1040-RG-L

100×100mm

7.5

φ8 Lead 1

Cross Roller Guide

Aluminum
-Black alumite finishing

Opposite attached

Supporting

5 Phase Step(High resolution)

Standard
2m Both end connectors

Fomblin YVAC2
(vacuum grease)

1μm/pulse(Full-step)

Within 15μm
(Z-Axis accuracy specification )

0.2

Within 1μm
(Z-Axis accuracy specification )

Within 2μm
(Z-Axis accuracy specification )

Within 20″
(Z-Axis accuracy specification )

Within 15″
(Z-Axis accuracy specification )

2.63

SURUGA SEIKI Co,Ltd.