PRODUCTS
Motorless 2-axis Goniometer Stage
Motorless 2-axis Goniometer Stage
Worm gear:KAW04V
Worm gear:KAW04V
Spec
| CAD |
|
| RoHS | RoHS Directive（2011/65/EU） |
| Stage surface size | 40×40mm |
| Travel length: Upper axis[±°] | 8 |
| Travel length: Lower axis[±°] | 6 |
| Load capacity[kgf] | 2.5 |
| Load capacity[N] | 24.5 |
| Travel mechanism | Worm gear |
| Reduction ratio: upper shaft | 1/240 |
| Reduction ratio: lower shaft | 1/240 |
| Guide | Cross Roller Guide |
| Main material | Aluminum - Black alumite finishing, Phosphor bronze - Black paint |
| Stage height[mm] | 40±0.4mm |
| Height of center rotation | 40±0.4mm |
| Sensor logic | All N.C. |
| Connector specifications | Pig tail |
| Sensor cover position | Opposite attached |
| Motor option | Motorless |
| Motorless: Applicable size | □38 Servo motor specification |
| Accessory cable | Sensor cable 5m One end loose wire |
| Grease change | Standard grease |
| MAX Speed Upper Axis [°/sec]Standard motor spec |
15 |
| MAX Speed Under Axis [°/sec]Standard motor spec |
15 |
| Resolution_upper axis Standard motor spec |
0.003°/Pulse(Full-step) |
| Resolution_lower axis Standard motor spec |
0.003°/Pulse(Full-step) |
| Repeatability positioning accuracy [Within±°] |
0.005 |
| Lost motion[Within °] | 0.01 |
| Runout accuracy of center rotation [mm Within] |
－ |
| Moment stiffness: Pitch [″/N・cm] |
1.57 |
| Moment stiffness: Yaw [″/N・cm] |
2.32 |
| Moment stiffness: Roll [″/N・cm] |
1.57 |
| Limit sensor | Available |
| Origin sensor | Available |
| Slit origin sensor | - |
| Weight[kg] | 0.56 |
| Motor Bracket | ○(Body installed) |
| Coupling (with screws) | ○ |
| Mounting screw | For motor(M2.5×6[4pcs]), For product(M3×6[4pcs]) |
| Sensor cable (One end loose wire) | ○(HR10AP-S-SB-6-5) |
Relevant product
© 2017 SURUGA SEIKI CO.,LTD.